Product Catalog
Brush and pile seals, roller tubes, endcaps, idlers, brackets, fasteners — precision components for screen, awning, shutter, garage-door, window, and door makers. Every one of them built to your exact spec.
© 2026 SB5 Supply Solutions. All rights reserved.
💡 Try industry terminology: “pile weatherstrip” (fenestration), “brush grommet” (data center), “skirting seal” (conveyor), or “damper blade seal” (HVAC) — all find the same base components.
Showing 54 of 96 products
Stamped steel motor adapter plates with star-shaped or keyed center inserts for securing tubular motors inside roller tubes. Prevents motor rotation during operation.
Sign in for pricing
Wall-mount cable guide brackets for cable-guided motorized screen systems. Routes and tensions the guide cables from headbox to floor anchor.
Sign in for pricing
Product Image
Safety brackets, retention clips, and tamper-resistant mounting hardware for motorized screen, shutter, and access system installations. Designed so rollers, housings, and end assemblies stay captive in high-wind events and high-cycle commercial installs.
Sign in for pricing
Numbered #1 through #5 sectional door hinges in wide-body 3" and narrow-body 2¼" configurations and 14, 13, 11, 16, and 18 gauge variants. Hot-rolled galvanized steel construction, graduated to match panel position and track angle per ANSI/DASMA 102 and 116. Every production lot is inspected for hole-pattern alignment and galvanization coverage before it leaves our vetted manufacturing partner.
Sign in for pricing
2" sectional garage door rollers in hardened steel and nylon 6/6 wheel options. 1-13/16" wheel diameter, 6200-2RS sealed bearing, zinc-plated 7/16" stem in 4" and 7" lengths. 10-ball and 13-ball ratings per ANSI/DASMA 102, 108, and 109.
Sign in for pricing
Residential end bearing plate for torsion-spring counterbalance systems. 11-gauge galvanized steel with 3⅜" shaft offset and a 1" ID × 2" OD radial flange bearing. ANSI/DASMA 102 and 103 dimensional spec; 400 lb load rating at 35,000 cycles.
Sign in for pricing
Pre-greased radial flange bearing for garage door torsion shafts. 1" ID × 2" OD with sealed shields and a stamped retaining flange. Commercial UCF100-class variants available for higher cycle ratings. ABEC-rated for 400 lb to 1M cycles.
Sign in for pricing
Primary structural mounting bracket for motorized retractable screen housings and awning cassettes. 3 mm 304 or 316 stainless steel, with 4×4" to 6×8" plate sizes for various screen widths and mounting surfaces. Slotted bolt holes for installation adjustment; 3/8" or M10 anchor bolts.
Sign in for pricing
Under-soffit and ceiling-mount bracket for motorized retractable screen and awning installations where wall-mount isn't viable. 304 stainless or aluminum 6061 construction; 75×100 to 150×200 mm plate sizes. Powder-coat finishes for exterior installations.
Sign in for pricing
Product Image
Sloped-surface compensation bracket for motorized retractable screen and awning installations on non-vertical walls. Fixed-angle variants at 22.5° and 45°; adjustable variants spanning 5°–75°. Cast aluminum or steel with powder-coat finish.
Sign in for pricing
Product Image
Numbered #1 through #10 commercial sectional door hinges in wide-body 3" 11-gauge configuration. Hot-rolled galvanized steel for door panels up to 25,000 cycle service per ANSI/DASMA 102 and 108. Hole-pattern aligned per panel position and track angle.
Sign in for pricing
Product Image
Torsion-spring stationary and winding cones for residential and commercial sectional door counterbalance systems. Cast iron, ductile iron, or aluminum construction with red/black DASMA color coding per ANSI/DASMA 102 and 103. Internal IDs match standard torsion-spring sizes.
Sign in for pricing
Product Image
Hardened plated steel winding bar for tensioning garage door torsion springs. Residential ½" × 18" and commercial 5/8" × 24" sizes. Hardened to resist deformation under load; plated for corrosion resistance.
Sign in for pricing
Product Image
Center bearing plate with integrated spring anchor for garage door torsion-shaft systems. 11-gauge galvanized steel with a flanged radial bearing for the torsion shaft. Available in slotted (SAB-450) and non-slotted (SAB-438) variants per ANSI/DASMA 102.
Sign in for pricing
Product Image
Grooved cable drum for garage door torsion-spring lifting cable systems. Die-cast aluminum or steel with red/black color coding per ANSI/DASMA 102. 4" standard residential drum plus high-lift (HL) and vertical-lift (VL) variants for non-standard door configurations.
Sign in for pricing
Product Image
Torsion shaft for sectional garage door counterbalance systems. 1" nominal Ø solid cold-rolled steel (CRS) or 1.25" OD CRS tube. Keyed or unkeyed variants per door manufacturer convention. Cut to door-width plus standard length allowances.
Sign in for pricing
Product Image
Galvanized or 304/316 stainless aircraft cable for garage door torsion-spring lifting systems. 1/8", 3/16", or 1/4" diameter with thimble + swaged stop + S-hook or loop ends. 7×7 or 7×19 cable construction per MIL-DTL-83420 and DASMA 102/103/108.
Sign in for pricing
Product Image
Universal slotted flag bracket for garage door track-radius transition. 11- to 14-gauge galvanized steel with slotted bolt holes for 10", 12", or 15" track radius accommodation. Per ANSI/DASMA 102.
Sign in for pricing
Product Image
14-gauge galvanized perforated angle for back-hanging garage door horizontal track. 1½×1½" and 2×2" profiles in 8 ft and 10 ft lengths. Slotted holes on 6" centers for installation adjustment. Per ANSI/DASMA 102.
Sign in for pricing
Product Image
Constant-force coil sash balance for single- and double-hung windows. 300-series stainless steel coil with zinc die-cast cam and glass-filled PA66 shoe. Eight standard capacity ratings (3A through 10K) plus tandem (5C/5CL through 10K/10KL) for heavier sashes.
Sign in for pricing
Product Image
Spring-loaded block-and-tackle window balance for single- and double-hung sash. 17", 20", 21", 27", 28", and 29" lengths covering 8–28 lb sash capacities. Mill-finish or zinc-plated steel U-frame with internal spring + cord + pulley assembly.
Sign in for pricing
Product Image
Spiral-tube window balance for sash 5–60 lb. 12"–48" lengths in 2" increments. Plastic or metal outer tube with internal spiral and steel spring. Tilt-pack housing for tilt-out cleaning.
Sign in for pricing
Product Image
Non-magnetic 300-series stainless steel 4-bar casement hinges in 8, 10, 10.5, 12, 12.5, 13, 14, and 16 inch lengths. Standard ~40 lb sash capacity through heavy-duty ~200 lb. Acetal or brass/nylon shoe for smooth sash travel.
Sign in for pricing
Product Image
Stainless 4-bar awning hinges sized for awning sash 8" through 24". Standard ~82 lb and HD ~158 lb capacities. Same construction as casement variant but with different stroke geometry for top-hinged awning sash.
Sign in for pricing
Product Image
Zinc die-cast cam-action sash lock and keeper sets for single- and double-hung windows. Screw spacings 2", 2-1/16", 2-1/4", 2-1/2"; cam offsets 1/16"–3/16"; cam throws 3/8"–9/16". AAMA 1304 forced-entry rated.
Sign in for pricing
Product Image
Tilt latch pairs for tilt-pac single- and double-hung windows. Mortise (1-1/4" hole spacing) and surface (~5" OAL) variants. Acetal, polypropylene, or glass-filled PA66 housing; stainless or zinc-plated spring.
Sign in for pricing
Product Image
Aluminum 6063-T5 screen frame extrusion in heavy-wall profiles from 5/16"×3/4" through 29/32"×7/16". 84"–144" lengths in mill, white, black, bronze, or anodized finishes. Compatible with standard PVC and foam-core screen spline.
Sign in for pricing
Product Image
Glass-filled nylon 6/6 wind-lock clips for rolling shutter slats in all standard aluminum profile heights — 37, 39, 40, 44, 55, 56, 57, 63, and 77 mm. Aluminum rivet attachment avoids galvanic corrosion against the slat. End retention is a load-path component in Miami-Dade NOA-tested systems (TAS 201 large missile, TAS 202 uniform load, TAS 203 cyclic).
Sign in for pricing
Product Image
Galvanized malleable iron, 304/316 stainless, or aluminum 6063 end locks for rolling shutter curtains. Sized for 2", 2-1/4", 2-1/2", and 3" steel curtains and 40–77 mm aluminum slat profiles. DASMA 108 and DASMA 115 compliant.
Sign in for pricing
Product Image
Aluminum 6063-T5/T6 guide rail extrusions for rolling shutter side tracks. Profiles 41×70, 53×22, 53×60, 69×23, and 76×28 mm in 12 ft and 19 ft sticks. 31,700 PSI minimum yield. ASTM E330 / TAS 201-203 design pressure ratings.
Sign in for pricing
Product Image
Complete hurricane storm panel mounting hardware set. F-track header 146″, H-header 2″, studded angle, wing nuts ¼-20, and sidewalk bolts. Aluminum 6063-T6 + 304/316 stainless construction. Miami-Dade NOA component-grade per ASTM B117 (salt-spray) and TAS 201-203.
Sign in for pricing
Product Image
Accordion shutter carriage wheel and pivot hardware. #10×3″ nylon 6/6 carriage wheels (UV-stabilized); 7/8 mm hex shaft pivots in 304/316 stainless; 45° and 90° pivot variants for corner panels. Miami-Dade NOA system component.
Sign in for pricing
Product Image
Accordion shutter locking mechanisms in four lever styles: CF, HV, L-handle, and T-handle. 3″×4″ die-cast zinc or aluminum body with 304 SS internals and brass cylinder. Hook deadbolt mechanism. ASTM F476 + TAS 201-203 system component.
Sign in for pricing
Product Image
Bahama shutter pintle and strap hinge sets. Strap lengths 5⅛", 7", and 8¼"; pintle offsets 0, ¾", 1¾", and 2½". Available in galvanized steel, 304/316 stainless, cast iron, solid bronze, and cast aluminum. ASTM B117 salt-spray verified for coastal service.
Sign in for pricing
Product Image
Colonial shutter pintle, L-hinge, and strap hardware sets. Strap lengths 6"–14"; pintle offsets 0, ½", 1", 1½", 2", and 2½". Cast iron, galvanized, 304/316 stainless, bronze, and cast aluminum. TAS 201-203 verified for Ultra Hinged Colonial NOA systems.
Sign in for pricing
Product Image
Aluminum keder rail in 5, 6.5, 7.5, 8.5, and 9.5 mm groove sizes for wall- and roller-tube-mounted awning fabric retention. Aluminum 6063-T5 extrusion, mill or anodized finish. Standard lengths 93″, 2.36 m, 4 m, and 6 m.
Sign in for pricing
Product Image
Welded PVC keder cord for awning and screen fabric retention in aluminum keder rails. 5, 6, 7, 7.5, 8, 8.5, and 9 mm core diameters with optional 20 or 30 mm welded PVC-coated polyester flap. Sized to match rail groove dimensions.
Sign in for pricing
Product Image
Aluminum full-cassette and semi-cassette hood extrusions for awning installations. Profile sizes 160×175 to 250×280 mm in lengths up to 7 m. AAMA 2604/2605 powder-coat finish. Integrated motor + idler bracket pockets.
Sign in for pricing
Product Image
Die-cast aluminum shoulder bracket for retractable awning lateral arms. Pitch adjustment 5°–75° for fabric tension and water shedding. Aluminum 6005 or 6063 with powder-coat finish.
Sign in for pricing
Product Image
Die-cast aluminum elbow joint for lateral-arm retractable awnings. Internal 3–5 mm stainless steel cable for tension; aluminum 6005/6063 outer construction with powder-coat finish.
Sign in for pricing
Product Image
Worm gearbox for manual awning operation and motor override. 1:7, 1:9, and 1:11 ratio variants with hardened steel worm and bronze gear. Compatible with standard European motor-override (CMO) systems.
Sign in for pricing
Product Image
High-pressure zinc die-cast dual-arm casement window operator for sash 24"–40" wide × up to 84" tall, 96–108 lb capacity. Hardened steel worm gear; coastal stainless option for marine environments. AAMA 904 cycle test compliant.
Sign in for pricing
Product Image
Zinc die-cast single-arm casement window operator for sash up to 30–40 lb capacity. 9"–13½" arm lengths. E-Gard zinc die-cast body with hardened steel worm and stainless steel arm.
Sign in for pricing
Product Image
Egress-rated 4-bar casement window hinges in 12-1/4", 12-5/16", and 16-7/16" lengths. 300-series stainless construction for life-safety code compliance. AAMA 904.1 verified.
Sign in for pricing
Product Image
Screen spline for retaining mesh in aluminum screen frame extrusions. Round, serrated, and foam-core variants in 0.120"–0.270" diameters; flat profiles in 5/16" and 0.344" widths. Vinyl (PVC) construction with foam-core options for tighter mesh retention.
Sign in for pricing
Product Image
Snap-in or stake-in corner keys for window screen frame extrusions. Glass-filled PA66 nylon (residential) or zinc die-cast (commercial) construction. Inside-miter and outside-miter profile-matched variants for all standard screen frame extrusions.
Sign in for pricing
Product Image
Tandem-wheel patio sliding door roller for residential and light commercial sliding glass doors. 1-1/8" or 1-1/4" stainless steel concave wheels on ball-bearing pivots, mounted in a zinc die-cast carrier. 150 lb capacity per pair per AAMA 906.
Sign in for pricing
Product Image
Heavy commercial tandem-wheel patio door roller for 200–500 lb sliding glass doors. 1-1/4" or 2-1/8" stainless steel concave wheels with reinforced zinc die-cast carrier and cam-adjustable height. AAMA 906 commercial-duty rated.
Sign in for pricing
Product Image
Grade 1 commercial full-mortise door hinge per BHMA A156.1. 4.5×4.5" or 5×5" 5-knuckle 4-ball-bearing construction in steel, brass, or 304/316 stainless. 2.5M cycle rated; NFPA 80 listed for fire-rated assemblies.
Sign in for pricing
Product Image
Residential full-mortise door hinge per BHMA A156.1 Grade 2/3. 3.5", 4", 4.5", or 5" square or radius-corner profiles in cold-rolled steel, brass, or stainless steel. Plain bearing or 2-ball-bearing variants.
Sign in for pricing
Product Image
Self-closing spring hinges per ANSI A156.17 Grade 1. 4", 4.5", or 5" sizes in steel, brass, or stainless steel. Adjustable spring tension for door weight matching. Used on fire-rated and self-closing assemblies.
Sign in for pricing
Product Image
Door latch strike plates in ANSI 4-7/8" × 1-1/4" profile, T-strike, security-extended box, and electric strike variants. Solid brass, 304 stainless, or plated zinc construction. BHMA A156.115 and A156.31 listed.
Sign in for pricing
Product Image
Deadbolt internals — faceplates, strikes, reinforcers, cylinder guards, and latch tubes — sized for 1-3/4" door, 2-1/8" bore, and 5/8"×2-1/4" latch face per BHMA A156.5 / A156.36.
Sign in for pricing
Product Image
Stainless or galvanized steel door edge reinforcer for 1-3/4" door with 2-1/8" bore. 5/8"×2-1/4" latch face cutout. Wraps the door edge to add forced-entry resistance and prevent jamb spreading. BHMA A156.115 listed.
Sign in for pricing